 |
 |
|||
 |
||||
| home products stepper motors gear box, encoder and brake for STÖGRA stepper motors | ||||
| Encoder for STÖGRA stepper motors | ||||
| In non disturbed operation the stepping motor runs synchronously to the pulses coming from the control. That means the motor rotation (= rotation of the rotor) is synchronously to the pulse frequency (= rotating stator field in the motor). In case of a load at the motor (e.g. via a static load at the motor shaft or because of accelerating the motor – dynamical load) the running of the motor will differ from the pulse frequency within a short time and within a certain max range. This results in a change of the load angle (= difference between the real position of the rotor and its position command value). By using an encoder, mounted at the motor, the load angle can be monitored, and a mechanical overload at the motor can be detected. |
||||
|
encoder E50 | |||
|
|
encoder H200/H500 | |||
Download |
||||
encoder
types E50, H200 and H500 – data sheet (57 KByte) |
||||
|
stepper
motors catalogue 2016 – Catalogue (850 KByte) |
||||
| stepper motors I position controls I power amplifiers I equipment I home I info@stoegra.de | ||||